Aluminum blind 16 mm

Control

The 16 mm blind is available in 5 handling options:

– Cord and wand
The blind is manually lifted up and lowerd down by polyester strings, which are passing through the cord lock that is located in the headrail. Moving the cords slightly to the center of the blind we can raise and lower the blind. Moving the cord back in the vertical position we can lock the blind on the desired position.
Tilting and setting of the slats on a requested position is operated by wand, that is connected to a tilt gear.
– Chain
The blind is manually lifted, lowered and regulated by a chain, that is connected to an in the headrail located monocommand gear. By pulling the chain slightly in one or other direction the angle of the slats is adjusted. By pulling the chain continuously in one or the other direction , the blind is lowered or lifted.
– Crank
The blind is manually lifted, lowered and regulated by a crank, that is connected to an in the headrail located gear. By tilting the crank slightly in one or other direction the angle of the slats is adjusted. By tilting the crank continuously in one or the other direction, the blind is lowered or lifted.
– Electrical steering
The blind is lifted, lowered and regulated by a low voltage motor of 24V, which is built in the headrail. Through an integrated with the motor switch or remote control we can adjust the slats and lower or lift the blind.
– Żaluzja międzyszybowa
Żaluzja 16mm może zostać wykonana jako międzyszybowa, do tzw. okien skrzynkowych. Pokrętłem przymocowanym za pomocą sprzęgła do żaluzji i poprowadzonym przez ramę okna sterujemy położeniem lamel, ustawiając je w dowolnie wybranej pozycji. Żaluzja podciągana i opuszczana jest za pomocą poliestrowych sznurków, które również przechodzą przez ramę okna. Z powodu braku zamka, do blokady sznurka wymagane są nawijacze sznurka.

Rails

The rails are made of profiled and painted steel, colour matched to the slats.
The headrails are available in two dimensions: 25×25 mm or 19×27 mm.
Bottom rail, „C” shaped, has dimensions of 10×20 mm (HxW).

Slats

The slats (width 16mm, thickness 0,21mm) are formed form an elastic high-quality aluminum, which is given a convex shape.

Feature of the blinds:
– double painted,
– resistant to scratches, hit and bending,
– lightfast,
– long-lasting colors,
– resistant to rust and non-electrostatic.

Their metallic coating fulfills also partly the thermal insulation.

Textiles

Cords and ladderstrings are made in 100% from polyester, color-matched to the whole blind. Equal spaces between the spans in ladderstrings guarantee a perfect overlap of the slats and their closure. The spacing between the ladder sections is 13 mm.

Variants

Side guiding
Using the steel wire coated with silicone drawn on both sides of the blind and fixed to the glazing bead with a special holders, we secure the blind and prevent its lean during the window is half open.
For roof windows
Each slat is manually switched between the individual threads in spans of the ladderstrings to guarantee a full rotation and closing the blinds on windows to an angle of 45˚.
Mixed colors
Each blind can be made from different slat colours. Normally both slats, rails and textiles are color-matched, but every Customer can project his own blind by choosing different colors of rails, slats and textiles and within the same slat various colors.

Measurements

Standard operation
Max. widith: 3700 mm
Max. height 4000 mm
Max. surface 10m2

Motorized, chain and crank
Max. width 3600 mm
Max. height 3600 mm
Max. surface 5 m2
Package sizes
Height of blind in cm: 100 150 200 250 300 350
Height of package in cm: 8 10 12 14 17 20