50 mm wooden blind

Control

The 50mm blind is available in 5 handling options:

– Cord and wand
The blind is manually lifted up and lowerd down by polyester strings, which are passing throug the cord lock that is located in the headrail. Moving the cords slightly to the center of the blind we can raise and lower the blind. Moving the cord back in the opposite side we can lock the blind on the desired position.
Tilting and setting of the slats on a requested position is operated by wand, that is connected to a tilt gear.

– Cords
The blind is manually lifted up and lowerd down by polyester strings, which are passing throug the cord lock that is located in the headrail. Moving the cords slightly to the center of the blind we can raise and lower the blind. Moving the cord back in the opposite side we can lock the blind on the desired position.
With a help of two strings wound on a gear, that is located in the haedrail, the position of the slats can be controlled- pulling the strings in one or the other direction the angle of the slats is adjusted.

– Chain
The blind is manually lifted, lowered and regulated by a chain, that is connected to a monocommand gear located in the headrail. By pulling the chain slightly in one or other direction the angle of the slats is adjusted. By pulling the chain continuously in one or the other direction , the blind is lowered or lifted.

– Electrical steering
The blind is lifted, lowered and regulated by a low voltage motor of 24V, which is built in the headrail. Through an integrated with the motor switch or remote control we can adjust the slats and lower or lift the blind.

Rails

The rails are made of profiled and painted steel, available in 6 colors: white, silver, black, beige, brown and anthrazite. The rail can be also covered with an extra slat made of any chosen slat.
The headrail has a measurement of:
– 51x57mm (HxW)
The bottomrail has a measurement of:
– 18×52 mm (HxW).

Slats

– Widith 50 mm,
– Thickness 2,8mm slats in basswood type
– Thickness 2mm slats in bamboo type
The slats in basswood type are made from solid wood, the bamboo slats arise in process of connecting the narrow slats of natural bamboo.

Feature of the blinds:
– the ink on the basswood slats is printed to harmonize their color,
– the bamboo slats are lackquered,
– UV resistant,
– long-lasting colors.
Wood is a natural product, which may react to temperature and moist conditions. We are not liable for slight shade changes or warping which may occur.

Textiles

Cords, thin ladderstrings and 25mm wide laddertapes are made in 100% from polyester, color-matched to the whole blind. Equal spaces between the spans in ladderstrings guarantee a perfect overlap of the slats and their closure. The spacing between the ladder sections in ladderstring is 44mm and in laddertape 41mm.

Measurements

Standard operation
Max. widith: from 2400mm to 2700 mm (according to the maximum length of the slat)
Max. height 4000 mm
Max. recommended surface 6m2

Motorized, chain and crank
Max. width: from 2400mm to 2700 mm (according to the maximum length of the slat)
Max. height 4000 mm
Max. Recommended surface 6 m2

Package sizes

With ladderstring
Height of blind (cm): 100 150 200 250 300 350
Height of package (cm): 16 20 24 28 32 36

With laddertape
Height of blind (cm): 100 150 200 250 300 350
Height of package (cm): 18 23 28 33 38 43